White Matter NanoZ Manuel d'utilisateur télécharger pdf (Page 39)

dimensions in SiteSizeX and SiteSizeY, thereby allowing for electrode arrays with

different site sizes. For simplicity, specify all these values in microns. The ordinal

position defines the mapping between the electrode site and the adaptor pin

number. So, for example, the 4

line in the MCS 8x8 standard electrode sites

definition: Site 45 = -50, 450, means that channel 4 of the adaptor is connected to

site 45. Since the mapping is determined by ordinal position, n is only used for

the site label in the Probe window and Probe report, and can therefore use any

numbering scheme. This added flexibility allows for zero-based vs. one-based

electrode site numbering (different data acquisition systems use one or the

other), or, for example, the row and column site numbering used by the MCS 8x8

standard MEA.

Finally, restart the application or click File | Reload definitions from the main

menu to make the nanoZ application aware of any changes to ʻelectrodes.iniʼ.

1 2 ... 34 35 36 37 38 39 40 41

Pas de commentaire

White Matter NanoZ Manuel d'utilisateur Page 39